JIMA Copper
JIMA COPPER
Add to Cart
STD copper foil (Standard copper foil )
Features:
1.the treated foil in gray or red
2.High peel strength
3.Good etch ability
4.Excellent adhesion to etching resist
Application:
1.Phenolic resin board
2.Epoxy board
Typical properties of Standard copper foil
| Classification
| Unit | Requirement | Test Method | |||||||||||
| Foil Designation | / | T | H | M | 1 | 2 | 3 | IPC-4562A | ||||||
| Nominal thickness | / | 12um | 1/2 OZ | 3/4 OZ | 1 OZ | 2 OZ | 3 OZ | IPC-4562A | ||||||
| Area Weight | g/m2
| 107±4 | 153±5 | 228±8 | 285±10 | 580±15 | 860±20 | IPC-TM-650 2.2.12.2 | ||||||
| Purity | % | ≥99.8 | IPC-TM-650 2.3.15 | |||||||||||
| Foil Profile | Shiny side (Ra) | um | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | IPC-TM-650 2.3.17 | |||||
| Matte side(Rz) | um | ≤6 | ≤8 | ≤10 | ≤10 | ≤15 | ≤20 | |||||||
| Tensile Strength | R.T.(23℃)
| Mpa | ≥150 | ≥220 | ≥235 | ≥280 | ≥280 | ≥280 | IPC-TM-650 2.3.18 | |||||
| Elongation | R.T.(23℃)
| % | ≥2 | ≥3 | ≥3 | ≥4 | ≥4 | ≥4 | IPC-TM-650 2.3.18 | |||||
| Subject | Ω.g/m2 | ≤0.170 | ≤0.166 | ≤0.162 | ≤0.162 | ≤0.162 | ≤0.162 | IPC-TM-650 2.5.14 | ||||||
| Peel Strength(FR-4) | N/mm | ≥1.0 | ≥1.3 | ≥1.6 | ≥1.6 | ≥2.1 | ≥2.1 | IPC-TM-650 2.4.8 | ||||||
| Pinholes&porosity | Number | No | IPC-TM-650 2.1.2 | |||||||||||
| Anti-oxidization | R.T.(23℃) | day | 180 | / | ||||||||||
| H.T.(200℃) | Minutes | 60 | / | |||||||||||
1.Standard Width,1295(±1)mm,May according to the customer request tailor.
2.We test the peel strength with FR-4(Tg140) prepreg ,please reconfirm with your pp.